b'PUMP SPECIFICATION 001.4M - STD - FL - SH:IP 1.4 m3 / Day / 100 RPM( 9 bbl / Day / 100 RPM )Available Models 001.4 M 1200 001.4 M 1800 001.4 M 2400Geometry: Single LobeOperating Speed: 50 - 500 RPMFree Gas Volume Fraction: 40% continuousSwept Rotor Angle: 28 Intake cavity area - mm 2( in 2): 177 ( 0.27 )Pump LiftH2O - m (ft) 1200 ( 3936 ) 1800 ( 5904 ) 2400 ( 7872 )Rated Pressure kPa (psi) 12000 ( 1740 ) 18000 ( 2611 ) 24000 ( 3481 )Rated Torque N-m (ft-lbs) 21 ( 16 ) 32 ( 24 ) 43 ( 21)Rotor Top Connection mm (in) 5/8" API PinRotor Head Diameter mm (in) 35.56 ( 1.40 )ROTOR STATOR - STD STATOR - SH-IPOverall Rotor Length m (in) 1.70 ( 67 ) 2.30 ( 91 ) 2.90 ( 114 ) Weight kg (lbs) 8 ( 18 ) 12 ( 26 ) 16 ( 35 )Nominal Rotor Drift OD mm (in) 35.56 (1.400 )Stator OD mm (in) 55.00 ( 2.165 )Collar OD (mm) 53.40 ( 2.10 )Connection Discharge - Intake 1.90\'\' NUE Box - 1.90\'\' NUE BoxStator Overall Length w TB m (in) 1.66 ( 65 ) 2.26 ( 89 ) 2.86 ( 112 )Weight kg (lbs) 15 ( 33 ) 23 ( 51 ) 30 ( 66 )Distance TB to Elastomer mm (in) 300 ( 12 )Tagbar/sub bottom connection 1.90\'\' EUE PinStator OD mm (in) FL - 55.00 (2.165 )Collar OD mm (in) FL - 55.00 (2.165 )Connection Discharge - Intake 1.90" NUE BoxStator Overall Length w TB m (in) 1.66 ( 65 ) 2.26 ( 89 ) 2.86 ( 112 )Weight kg (lbs) 15 ( 33 ) 23 ( 51 ) 30 ( 66 )Distance TB to Elastomer mm (in) 300 ( 12 )Tagbar/sub bottom connection SH-INSERT - 1.90" NUE PinNOTE INSERT pump configuration for 2 7/8" tubing requires a 1.40" OD rotor coupling for pick up. Target in Well Flow Rates m3/d( bbl/d )Target In Well Torque N-m ( ft-lbs )7 4540 40 3062400450 -RPM 35 35m3/d25bbl/dN-m Ft-lbs530301800 204 25 25300 -RPM3 20 20 15120015 152 10150 -RPM 10 101 55 50 0 0 00% 20% 40% 60% 80% 100% 0% 20% 40% 60% 80% 100%Percent of Rated Lift Percent of Rated LiftMANTL reserves the right to change information contained in this document without prior notice.Contact your MANTL representative for additional information. 5/15/2020FROM THE GROUND UP'